| Current Price | uS$ 29,999 | 
| Vessel Type | Cruiser-Racer | 
| Builder | Ericson | 
| Year | 1989 | 
| Location | Port Washington, New York, United States | 
| Hull Material | Fiberglass | 
| LOA | 34 feet | 
| Beam | 11 feet | 
| Engine Manufacturer | universal | 
| Engine Model | |
| Engine Count | 1 | 
| Engine Year | 1989 | 
| Fuel | Diesel | 
| Max Speed | knots | 
With healthy sail-area displacement and ballast ratios, a moderate fin keel, and a semi-balanced shallow spade rudder, it is an able PHRF performer. And with a Fiber glassed hull-to deck joint, keel-stepped mast, and lead ballast keel, it is built to take the knocks of cruising. The Ericson 34’s cockpit and deck layout is a good example of what you should expect of a sensible crossover racer-cruiser from the late 80s.
The T-shaped cockpit with just enough room for the helmsman to squeeze past the standard 36-inch wheel to move forward. The raised cambered seat with gull-wing hatches offers an excellent view ahead and provides an extra vertical space in the lazarette. The cabin-top mounted traveler means a single-handed sailor is out of reach of the mainsheet and traveler, but this can be remedied with minor modifications. A mid-boom sheeting arrangement can make the boom-end more vulnerable when the boat rolls in a seaway. But the boom is relatively high above the deck, so conservative sailing in a beam sea will guard against any trouble.
The double-spreader rig and high-aspect sail plan, combined with inboard shrouds and an inboard genoa track, allow for tight sheeting angles, and will permit a boat with a good set of sails to easily tack through 90 degrees in a moderate breeze.
Outboard tracks mounted on the toe rail permit more open sheeting for off the wind. The wide side decks, allowing easy passage fore and aft outside the shrouds, are about as good as we’ve seen in a monohull of these dimensions. The hardware was a step above the standard equipment listed in the original Ericson brochure.
A pair of self-tailing Lewman 30s was to starboard of the companionway dedicated to halyards, reefing lines, traveler, and the mainsheet. Another ST30 and a standard Lenmar 24 on the opposite side of the companionway handled vang, reefing tack line, the other side of the traveler line, and jib halyard. The boat also featured a rigid boom vang that provided good control of mainsail leech twist, as well as supported the boom when the topping lift was slack. Jib furling lines as well as the genoa sheet was within arm's reach of the helm. A simple lazy-jack system made setting and dousing the main a breeze.
Specifications
Hull and Deck
Cockpit
Forward Cabin
Salon
Navigation Station
Galley
Head
Aft Stateroom
Disclaimer
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
«Yacht Access found my first Hatteras for me over twenty-five years ago; since then they have helped me buy and sell four more boats – and become great friends. Their service during the sale is great, but their service after the sale they is exceptional – without the knowledge and guidance provided by Yacht Access I would never have had such a pleasurable ownership experience. The staff at DDYS knows everyone in the boat business and helped me find the best service and supply vendors to take care of my boats – I could not have owned five boats without them!»
— Brent - Fort Lauderdale, Florida
 
				
				
			
				
			
					Home
					About
 
					Yacht Sales
 
					Yacht Charter
 
					Brokerage Services
 
					Contact
 
				
					Toll Free: 	1-888-230-7983
					Local: 954-527-4848
					Fax: 954-337-6155
				
Copyright Yacht Access, All Rights Reserved. Privacy Policy
Website Development by IWD Marketing